Shop notes from Joust:

 

Picked up on 1-24-2009, along with a Time Warp pinball. Machine worked, had been changed to a switch-type power supply which was nice.

 

Repair log:

Removed wood screw holding rear monitor access panel to cabinet. Found original door lock hardware in bottom of cab & reinstalled.

Removed marquee light assembly and replaced with more standard 15w fixture.

Reseated connectors on the board that processes button inputs, cleaned all switch contacts.

Tied the disconnected unreg 6.3V into the 5V output on PS to illuminate the quarter return and P1/P2 start buttons.

Replaced AC plug with 3-prong (ground pin had been cut off).

Replaced battery holder, original had some battery corrosion.

Return to repair logs